|
Pam's bike is the second bike I made. This bike was designed for good
standover height and slightly higher than normal handle
bars. Otherwise it's a geared mountain bike.
|
|
The angle on the dropouts I got was little too wide so I did a
little bending of the seat stays to give the bike a retro
look. The theme is red and blue. The powder was supposed to have
purple flecks in it but they aren't really visible unless you
look real carefully in bright sun light.
|
|
|
Here is the frame after powder coating.
|
|
|
|
The bare frame, ready for powder.
|
|
|
Brazing the frame. Still pretty early in the process of building the frame.
|
|
|
|
This is my home made jig. It takes some adjusting each time but it
holds things in place.
|
|
|
And this is the drawing used for measurements and planning.
|
|
|
|
